Put on industry mask, gloves, safety belt and hat.
When operate on bus roof top, do use the safety rope and assure its safety.
Installation procedures:
1. Hoisting air conditioner, get ready for installation;
2. Make sure roof surface is clean, prepare roof top grooves and imbedded bolts;
3. Make sure sponge is tightly taped and clearance<2mm, paste the sponge around the grooves;
4. Thickness and width of glue on top of sponge ≥8mm, apply glue onto sponge;
5. Put on rubber pads and strip then apply glue;
6. Make sure the outer surfaces of rubber pads and sponges and base are covered by glue and glue surface is smooth, flatten the surfaces of glue.
Roof top preparation job is done.
7. Lift bus air conditioner to the bus roof;
8. Carefully drop the bus air conditioner where all holes are matched;
9. On the bolt are big washer, spring washer and hexagon nut, put on big washers and nuts on bolts;
10. Fasten the nuts tightly, opening of spring washer ≤ 2 mm;
11. Apply sikka glue on the bolts and nuts;
12. Open the high voltage box and do the wiring(need to contact us for wiring details);
13. Fixation of dome and air conditioner cover.
As a professional bus air conditioner manufacturer in China, Cling offers a wide range of air conditioning products for 6-25m bus, citybus, coach, school bus, shuttle bus, special vehicles etc at best cost-performance.
If you have any questions please don't hesitate to contact us.